Installation Guide
8. Click on OK button! The download is going to be added to the download
list. The ongoing download file statuses can be checked in the Download
manager. Click on the Download manager icon on the main surface of
the Control Center software to check the status!
9. The files are going to be downloaded to the default download container.
Using the LPlayer to watch .scv files
LPlayer has been developed to play the downloaded video streams, saved in
Logipix Video Surveillance System.
LPlayer is a simple, easy to use software to play the saved video files of the
surveillance system. The video streams can be played forward or backward at
different speeds and they can be stepped frame by frame. The software is able
to display sixteen camera pictures at once. Additional video content
information can be shown as well. The images of the panoramic picture can be
restitched and the white balance correction can be readjusted if necessary.
Installation of the LPlayer
1. Put the installation CD in the client computer!
2. Open Utils/STP/LPlayer folder and start LPlayerRar.exe!
3. Browse the installation folder then click on Install!
4. You can find LPlayer.exe in the folder where you have installed the
software.
Associate .SCV files
1. Start the software by LPlayer.exe!
2. Click on Settings icon!
3. Find the following icon:
4. Press this button to associate all the .SCV files with the LPlayer.
After this LPlayer will open this kind of files.
5. To open an .scv file, browse it on your computer then double click on the
file name! The software is going to open the file.
78/80
To Next Page
Loading...