Logipix LOBJ-05P - Activating Stadium Functions; Registering Devices

Installation Guide
Software configuration
Activating special Stadium functions
1. Go to C:\STP folder on the client computer and open AccAlrm.ini in an
editable Notepad (eg. in Total Commander press F4)!
2. Find the [Stadion] section and enable the function! Rewrite Enabled=No
to Enabled=Yes
3. Find the [Client] section and enable the Events Form! Rewrite
EnabledEventsForm=No to EnabledEventsForm=Yes
4. Save and close the .ini file!
Registering the devices
There are two ways to register new devices in the system.
Traditional registration
1. Start the Control Center software!
2. Click on the Configure icon on the main software surface!
3. Find the left tree in the popup Camera configuration window and right
click on the Not in group tree node, than left click on the Add new
controller... or you can use the Add new controller icon... as well! The
window of the New item appears. Enter the Name of the LNVR, adjust its
IP address and choose Logipix NVR Enterprise from the Type list! Click
on OK!
43/80