Installation Guide
6. If the new setup is selected, find the Template list on the settings form!
Select Stadium 15MP after event from the drop down list! Override the
actual settings! The software is going to configure the multi-megapixel
camera automatically for after the event. This camera setup will operate
when the Event has closed.
Configuring the Logipix Full HD cameras
1. Click on the Configure icon on the main software surface!
2. Select the Logipix Full HD camera in the left tree which you would like to
configure! Click on the '+' sign near the camera name and select
Settings!
3. Find the Template list on the settings form! Select Stadium Full HD event
from the drop down list! Override the actual settings! The software is
going to configure the Logipix Full HD camera automatically.
4. Press the Save as setup button at the bottom of the window! Right click
on the created setup in the left camera tree then Rename it! This camera
setup will operate while the Event is open.
53/80
To Next Page
Loading...