Installation Guide
5. In case of selecting several cameras, a table is going to be displayed at
the place of the camera pictures. The rows of the table contain the
selected cameras and the columns of the table contain the parameters
and the setups of the cameras. Identical rows (identically set cameras)
and columns (identically set parameters for every cameras) of the
parameters may be hidden in the table. In that case the number of the
hidden rows and columns are signed. There are checkboxes before every
rows and columns wherewith we can sign which parameters and setups
we would like to override on which cameras. All the signed checkboxes
can be deselected and reselected at once, separated for the rows and for
the columns.
6. After the parameter selection has checked click on the chosen cameras
by the right mouse button in the right tree, then select Paste camera
settings!
58/80
To Next Page
Loading...