Lorex ECO 2 User Manual

120
Appendix F: Assigning A Fixed IP To Your DVR
About IP Ranges
It is recommended to set the static IP address below the scope of your router. For example,
if the router assigns an address ending between 100-254, choose an address ending
between 2-99.
Step 2 of 2: Enter the desired static IP address in the router
Prerequisites:
• Obtain the DVR’s MAC address
To enter a static IP into the router:
1 Under
the main menu, click on LAN & DHCP Server.
2 Co
nfigure the following:
• St
atic DHCP: Select Enabled and then click Apply.
• Name: E
nter the desired name of your device
• IP Addr
ess: Enter the IP address that you wish to make static. This IP address must be the
same address specified in the DVR.
• MA
C Address: Enter the MAC address of your DVR.
3 Cl
ick Add.
• The DVR info appears in the Static DHCP list.
Once the DVR has been added to the Static DHCP list, you
have successfully created a static
IP address for your system.
Select Enabled
Add
Enter DVR name, IP
address and 
Mac address

Lorex ECO 2 Specifications

General

Brand	Lorex
Model	ECO 2
Category	DVR
Language	English