51
Setting up your DVR for Remote Connectivity
Setting up your DVR for Remote Connectivity
The system features a built-in browser-based software that allows you to access your
system remotely over your local area network (LAN) or over the Internet using Internet
Explorer
®
(PC) or Safari
®
(Mac).
System Requirements
Prior to using Lorex Web Client, make sure your system meets or exceeds the following
system requirements:
NOTE: If a user
connects to the system remotely, there may be slow performance when
accessing the system locally. This is normal, and not a malfunction.
Description Requirement
CPU
Pentium
®
4 or above
Operating
Sy
stem
Windows XP/Vista/7
Mac OSX 10.6.6 and above (Intel processors only)**
Memory 256 MB RAM or greater
Video 16 MB of video memory
Network (LAN) 10/100 BaseT Network
Network (WAN) 384 Kbps upstream*
*High-speed Internet service is recommended when using DVR Netviewer.
Browser Internet Explorer 7 or later (PC) / Safari 5.0 and above** (Mac)
Lorex Web Client
For details on navigating the remote viewing interface, see
“Remote Viewing Using a Web Browser” on page 62.
** For the latest compatibility list, check www.lorextechnology.com, as new software versions are released
to the market.
To Next Page
Loading...
