Lorex ECO 2 - Configure System Warnings

50
Using the Main Menu
To configure system warnings:
1 Cl
ick the Events tab.
2 Co
nfigure the following:
• Event
Type: Select the event that triggers
the system to send out a notification or
alarm trigger. Choose from Disk No Space
(low hard drive space), Disk Error (hard
drive error), or Video Loss.
• Ena
ble: Select Enable or Disable to
activate or deactivate the system from
sending out notifications.
• Al
arm Out: Select the checkbox to enable
alarm out devices from triggering.
• Sho
w Message: Select the checkbox for
the system to display an error message
when an event occurs.
• Send
Email: Select the checkbox for the
system to send out email notifications
when a system error occurs. Note, email
notifications must be configured.
• Latch Time: Sel
ect the delay duration in
the drop-down menu.
• Buz
zer: Select the buzzer (system beep)
duration when the system detects a
system error.
3 Cl
ick Apply to save your settings.