64
Remote Viewing Using a Web Browser
Changing Viewing Modes
You can change the number of channels that the system displays simultaneously (i.e.
Split-screen Mode, Single-channel Mode, etc.)
To change the DVR’s viewing mode:
• Click one of the following: .
• If the controls are not shown, click .
Taking Screen Shots
The system can take screen shots of a selected channel during live playback.
To take a screen shot of a channel:
1 Cl
ick beside the desired channel to capture an image.
2 A pop-up windo
w opens on the bottom left corner of the window. Click Preview to view the
image or Folder to show the image in the save folder.
If you receive an error taking a screen shot:
You may receive an error when taking a screen capture. This is caused by an Internet
Expl
orer security setting.
To reduce the security setting in Internet Explorer:
1 Cl
ick on Tools>Internet Options. (In IE9, click the gear icon on the top-right corner).
2 Cl
ick the Security tab.
3 De-sel
ect Enable Protected Mode.
4 Cl
ick Apply to save your settings.
5 Refr
esh Internet Explorer.
To Next Page
Loading...
Need help?
General