Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Basics
Page 1-25Programming Procedures
1
Description Page
SysRenumber
Default Numbering Default extension numbering plans 3–20
* 2-Digit
* 3-Digit
* SetUp Space
Single Single extension renumbering 3–26
* Lines Lines/Trunks
* Extensions Extensions
* Pools Pools (Hybrid/PBX only)
* Group Page Paging Group
* GrpCalling Calling Group
* Adjuncts Adjuncts
* Park Park
* ARS DialOut Automatic Route Selection dial out (Hybrid/PBX only)
* RemoteAccs Remote Access
* DSS Buttons Page buttons on the DSS
* ListDirctNo Listed directory number
Block Block extension renumbering 3–29
* Lines
* Extensions
* Adjuncts
NonLocal UDP Specify ranges of extensions on remote networked system 3–32
Operator
Positions System operator positions 3–42
* Direct Line* Direct-Line Console (DLC) 3–45
* Queued Call* Queued Call Console (QCC) 3–43
Queued Call QCC optional features (Hybrid/PBX mode only) 3–368
* Hold Rtrn Hold Return 3–368
- Return to Queue
- Remain on Hold
* HoldRelease Automatic hold or release 3–370
- Auto Hold
- Auto Release
* Threshold Queue over threshold 3–373
* ElvatePrior Elevate priority 3–375
* InQue Alert* Calls-In-Queue Alert 3–377
- InQue Alert Enable
- InQue Alert Disable

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English