Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-309Computer Telephony Integration (CTI) Link
3
Console Display/Instructions Additional Information PC
! Enter the extension number.
! Save your entry.
Select
(QWHU.

! Return to the System Programming menu.
Select
([LW twice.

CTI Link Programming Errors 3
During the programming of the CTI link, entering an inappropriate extension
number can give you an error message. This section contains displays of each
screen and information about what to do if the screen appears.
System Not in Hybrid/PBX Mode 3
This message appears if the communications system is not in Hybrid/PBX mode.
CTI links cannot be used with communications systems operating in Key mode or
Behind Switch mode.
&7,/LQN
If you enter an invalid extension number
(QWHUH[WHQVLRQQXPEHU
you see an error screen as shown in
“CTI Link Programming Errors”
QQQQ
on page 3–309.
'HOHWH
SP: “Entering an Extension”
%DFNVSDFH
([LW (QWHU
Dial or type [ nnnn ].
Ã
&7,/LQN([WHQVLRQV
([WHQVLRQ[[[[)DLOHG
6\VWHP1RWLQ
+\EULG3%;0RGH
([LW

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English