Lucent Technologies MERLIN LEGEND Release 6.1 System Programming

MERLIN LEGEND Communications System Release 6.1
System Programming Guide 555-661-111
Issue 1
August 1998
Programming Procedures
Page 3-398Optional Group Features
3
Optional Group Features 3
This section contains programming summaries for the following optional features:
■ Pickup Groups
■ Group Paging
■ Group Coverage Member Assignments
■ Group Coverage Delay Interval (Release 4.0 and earlier)
■ Group Calling Member Assignments
■ Group Calling Line/Trunk or Pool Assignments
Pickup Groups 3
Use this procedure to assign or remove an extension from a call pickup group. A
pickup group consists of telephone users who can answer each other’s calls
either by pressing a button or by dialing a code.
NOTES:
1. A maximum of 30 pickup groups, with a maximum of 15 extensions per
group, is allowed.
2. An extension can belong to only one group.
3. Before reassigning an extension to a new group, you must remove it
from its current group.
Summary: Pickup Groups 3
Programmable by. System Manager
Mode All
Idle Condition Not required
Planning Form Form 7a, Pickup Groups
Factory Setting Not applicable
Valid Entries Pickup group number, extension number
Inspect Yes
Copy Option No
Console Procedure
([WHQVLRQV→&DOO3LFNXS→Dial pickup group no.→
(QWHU→Dial ext. no.→(QWHU→(QWHU→([LW→([LW
PC Procedure

→→Type pickup group no.→→Type ext. no.→
→→

Lucent Technologies MERLIN LEGEND Release 6.1 Specifications

General

Brand	Lucent Technologies
Model	MERLIN LEGEND Release 6.1
Category	Conference System
Language	English