Luna 4600 - Page 125

Optical Backscatter Reflectometer 4600 115
User Guide
6
Response: None
Example:
CONF:CFG C:\LPA_Data\myref, C:\LPA\myparams.ini, 1,
0, C:\LPA_Data
Sets the reference trace to “C:\LPA Data\myref” and the
default parameter file to
“C:\LPA\myparams.ini”. Specifies
that the reference trace should be use, and that the feature
specific tolerances should be used.
CONF:CFG “”, “C:\test\myparams.ini”, 0
Sets the default parameter file to “C:\LPA\myparams.ini”,
and specifies that the default parameter file should be used
to evaluate traces. The reference trace
directory, base folder,
and useGenTol setting are not changed.
CONF:CFG “”, “”, 1, 0
Specifies that traces should be evaluated using the current
reference trace and the feature-specific tolerances. The
reference trace, default parameter file, and output base
folder are not changed.
CONFigure:REFerencetrace?
Usage: CONF:REF?
Description: Queries the current LightPath reference trace.
Response: The current reference trace directory.
This information can also be obtained using the
CONF:CFG? query. Since querying the reference trace is a
more common operation, it is provided its own query for
convenience.
Example: CONF:REF?
C:\LPA_Data\golden
Indicates that “C:\LPA_Data\golden” is the current
reference trace. Note that this response does not indicate
that the reference trace (rather than the default parameter
file) is being used to evaluate traces. That information can
be determined using the CONF:CFG? query.