Luna 4600 - Page 148

136 Chapter 7
Controlling the OBR Remotely
7
(1) range (page 28).
Response: None.
CONFigure:DistanceRANge?
Usage: CONF:DRAN?
Description: Retrieves the OBR Distance Range (page 28).
Response: Returns the Distance Range, either zero (0) in the Normal
Range or one (1) in the Extended Range.
CONFigure:DeviceUnderTestLength
Usage: CONF:DUTL {length}
Description: Sets the DUT length to the value specified in meters for
Extended Range mode. This command has no effect on
Normal Distance Range scans.
Response: None.
Example: “CONF:DUTL 4.3125” sets the length of the DUT to
4.3125 m.