214658 59 Revision A
Figure 5.11: Driveline in Storage Position
6. Rotate disc (B) on header driveline storage hook (A)
and remove driveline from hook.
Figure 5.12: Attaching Driveline to Combine
7. Pull back collar (A) on end of driveline and slide
driveline on feeder house driveshaft until the
collar locks.
8. Close feeder house driveshield.
Figure 5.13: Combine Receptacle
9. Remove cover (A) from combine multicoupler
receptacle.
ATTACHING HEADER TO COMBINE
To Next Page
Loading...
