214658 70 Revision A
Figure 5.38: Attaching Coupler
19. Position coupler (A) onto header receptacle and push
handle (B) downward to engage coupler pins into
receptacle.
20. Push handle to closed position until lock button (C)
snaps out.
21. Open cover (D) on the header electrical receptacle.
22. Remove electrical connector (E) from the storage cup
on combine.
23. Align lugs on electrical connector (E) with slots in the
receptacle, push the connector onto the receptacle, and
turn the collar on the connector to lock it in place.
24. Remove draper deck shipping braces. Refer to 5.5
Removing Deck Shipping Braces, page 71.
ATTACHING HEADER TO COMBINE
To Next Page
Loading...
