Mackie DL806 and DL1608 Reference Guide
116
Channel Presets vs DSP Presets
ī ThereīareīchannelīpresetsīandīDSPīpresets.īAlso,īthereīareīfactoryīpresetsīforībothīorīyouīmayīī ī ī
ī createīyourīownīuserīpresetsīforīeach.īSoīmanyīoptions!īLetāsītakeīaīlookīatīeach:
Input and Output Channel PresetsīāīChannelīpresetsīchangeīvirtuallyīallīcontrolsīonītheīchannel.īī ī
There are both input and output channel presets. Input channel presets do NOT change pan, mute,
fader, solo, polarity or the linked state. Output channel presets do NOT change balance, level, the
aux/FX send conīguration or the linked state. This allows you to easily audition presets on a channel
one after another.
ī Inputīchannel,īoutputīchannelīandīDSPīpresetsīcanībeīstoredīandīrecalledītoīlinkedīandīunlinkedīī ī
ī channels.īTheīlinkīparameterīisīNOTīstoredīinītheīpreset.
ī ī Channelīnamesīandīimagesīareīstoredīinītheīpresetīifīpresentīonītheīsameīchannelīwhenīcreatingītheīī ī
preset. When recalled ā if a name or image is present ā it will be updated on the destination channel.
DSP PresetsīāīDSPīpresetsīchangeīonlyīaīportionīofīanīinputīorīoutputīchannel.īThisīincludesīEQīī ī
ī andīHPF,īgate,īcompressor,īandīgraphicīEQ.īTheīEQīandīdynamicsīpresetsīalsoīrecallītheītypeī[modernī
ī orīvintage].īHowever,īDSPīpresetsīdoīNOT change the on / oī state. This allows a user to audition
presets with the processor on or oī, as desired.
ī ī Soīhowīdoīyouīgetītoītheseīvariousīpresetītypes?īEasy!īTheīpresetībuttonīisīsmartīandīknowsīī ī ī
what screen you are currently viewing by what is shown in the current parameter display.
In turn, it will display the correct preset window when the presets button is tapped. From the
mixer view, you may access the input or output channel presets depending on what is showing
in the current parameter display.
Below are two images. The īrst displays the input channel presets and the second displays the output
ī channelīpresets.īNoticeīthatītheīoutputīchannelīpresetsīonlyīdisplaysītheīfactoryīdefaultībutton.īī ī
ī Thatīzeroesīoutītheīsettingsīofītheīoutputīchannel,ītheīmasterīfader.īAnyīsettingsīthatīyouīmayī
ī wantīforītheīoutputīchannelīcanībeīcreatedīandīstoredīasīaīuserīpreset.īAlsoīnoteītheīcurrentī
ī parameterīdisplayīwhenīenteringītheīworldīofīpresets;īitīmustīshowītheīcurrentīchannelīsystemī
name and current parameter name that you want to adjust, recall, etc.
INPUT
CHANNEL
PRESETS
OUTPUT
CHANNEL
PRESETS