Mackie DL806 and DL1608 Reference Guide
28
Checkitout...you’regoodtogo!Withyourassistance,theiPadfoundtherouteranddialedinthe
Wi-Fi connection!
NowgobackandlaunchtheMasterFaderapp.It’sthateasy!
Router Settings
Default router settings are typically ne, but most Wi-Fi routers may be customized to ensure high
performanceandasecurenetwork.We’lloutlinesomecommonroutersettingstoadjust,
but since each brand is dierent, refer to its manual to learn how to adjust these settings.
(1) SSID —SSIDstandsforServiceSetIdentication.CreateanamefortheWi-Finetworkhere.
(2) Security — Youwillneedtoselectasecuritymodeandpassword.Wesuggestusing
WPA[Wi-FiProtectedAccess]forsecuritypurposesandapasswordthatiseasyforyouto
recall, but dicult for others to hack.
This prevents strangers from joining your network and controlling the mixer,
so pick a good password!
(3) Band — No,we’renotheretotalkaboutyourfavoriterockband.Rather,weareheretochoose
the Wi-Fi band. If you are in Wi-Fi mode 802.11n, you might be requested to choose a Wi-Fi band.
Here, we prefer and strongly suggest 5GHz. However, 2.4GHz also works.
(4) Enable Auto Channel Selection
1
— Lookforasettingnamed“AutoChannelSelection”(orsimilar)
and enable it. The Wi-Fi channel with the least interference will be selected automatically.
This should set you up nicely with no issues at all, so feel free to exit out of settings at this point.
Ifyoudesiremoreinformation,refertotheTroubleshootingsectioninAppendixA:ServiceInformation
on pages 142-143.
1
EnableAutoChannelSelectionisanadvancedoptionthatisusuallyautomaticallyenabled.Ifyouseeit,
ensure that it is enabled.