EasyManua.ls Logo

Maeda CC1485S-1 - Page 30

Maeda CC1485S-1
370 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
CAUTIONS WHEN OPERATING CRANE IN LOCATION WITH HIGH OUTPUT
MICROWAVE EMISSION
Operating the crane near high output microwave emission equipment such as a radar or
TV/radio broadcast antenna causes the crane construction to be exposed to the microwave
and generates induced current, therefore is very dangerous. In addition, the mechatronics may
become haywire.
Establish grounding between the Machine frame and the ground when working in such
location. In addition, slinging operators are requested to wear rubber boots and rubber gloves
since risk of electrical shock by contacting parts such as the hook or wire exists.
BEWARE OF ASBESTOS DUST
Inhalation of asbestos dust may result in lung cancer. This
Machine does not contain asbestos, but asbestos may be
found in the wall, ceiling or other construction locations within
the worksite of this Machine.
In addition, be careful of the
following when working with a material that may contain
asbestos.
Put on designated dust free mask and/or other protection
equipment where necessary.
Do not use compressed air for cleaning.
Spray water
when cleaning to prevent airborne asbestos
dust.
Always work at windward location when operating the
Machine at a site that may contain asbestos dust.
Do not allow unauthorized personnel to approach the work
site.
Strictly observe the assigned rules
related to the worksite
and environmental standard.

Table of Contents

Other manuals for Maeda CC1485S-1

Related product manuals