Maeda CC1485S-1 - Page 89

81
[12] EMERGENCY STOP SWITCH
Use this switch to stop the engine urgently.
• ON: Press the switch. The engine stops.
"Emergency stop" is displayed on the upper right of the
monitor.
• OFF: Turn the switch clockwise (in the arrow direction on the
right illustration).
The switch returns to the original position.
NOTES
When restarting the engine after an emergency stop, be
sure to turn the EMO switch to the “OFF
” position before
starting the engine.
[13] MAINTENANCE SWITCH
This switch is not used for crane operations.
It is a maintenance switch for servicing.
[14] LEVELLING INSTRUMENT
If crane operation is performed with the machine tilted, it may cause tripping.
Find a place, whilst looking at the levelling instrument, where the machine body is in a level
state before starting crane operation.
If work is unavoidably performed on a slope, place planking or lay earth on the ground to
make the ground level.
This displays an inclination status of the machine.
The inclination and direction of the machine can be
determined from the position of the air bubbles.
Use this to check whether the machine body is in a level
condition.