IMPULSE•G+ Mini Advanced Instruction Manual - March 2014
1-4
Introduction
The IMPULSE•G+ Mini drive is the next generation of Magnetek, Inc. drives, providing compact
and economical crane control. The drive maintains a similar footprint size and feature set of previous
generation drives, while offering expanded capabilities in both Basic and Advanced modes. The
drive is configured by default as BASIC with features that include:
• Volts/Hertz Control
• X-Press Programming™
• Swift-Lift™
• Reverse Plug Simulation™
•Quick Stop™
• End-of-Travel Limits
• RS485 Communications
Switching the IMPULSE•G+ Mini to ADVANCED mode enables many additional control features,
including:
• Open-Loop Vector Control
• Micro-Positioning Control™
• Up to 15 Discrete Speed References
• Load Check II™
• Maintenance Timers
• No-Load Brake*
• Braketronic™
• Expanded Programmable Input/Output Capabilities
NOTE: *For approved OEM vendors or suppliers
This manual will provide support for the basic and advanced operating features of IMPULSE•G+
Mini. For additional information, visit www.magnetekmh.com/manuals.htm.
To Next Page
Loading...
