IMPULSE•G+ Mini Advanced Instruction Manual – March 2014
4-11
Parameter Modes
All parameters are organized under four modes:
Operation Mode
Drive operation is enabled. Drive status LED lights.
Programming Mode
Parameter access levels, control method, motion, speed control mode, and passwords are selected.
Parameters are set/read. Items to be set/read vary depending on the access level setting.
Auto-Tuning Mode
Motor parameters are automatically set by entering tuning data (motor nameplate values) when using
V/f or OLV control method.
Verify Constants Mode
Only parameters that have been changed from the factory default settings are shown here. They can
be set/read.
To Next Page
Loading...
