IMPULSE•G+ Mini Advanced Instruction Manual – March 2014
4-10
Parameters
The parameters are organized by function group, that determine how the drive functions. These
parameters are programmed in the drive’s software as measurable values or options—both of which
will be referred to in this manual as settings. While some of these parameters are associated with one
setting, others are tied to a number of possible settings.
NOTE: The terms “constant” and “parameter” have the same meaning.
By default, the IMPULSE•G+ Mini is configured for a common crane system. If you find it
necessary to change the initial settings, it is recommended that you only allow qualified crane system
technicians to program the drive. This can be accomplished by using the Password and Access Level
features. For more information on these security features, see page 4-14.
To Next Page
Loading...
