IMPULSE•G+ Mini Advanced Instruction Manual – March 2014
5-18
Reverse Plug Simulation™
The Reverse Plug Simulation provides an automatic alternate deceleration time/acceleration time at
a change direction command before the brake sets. The deceleration time and the acceleration time
are set independently of the normal acceleration and deceleration times.
Figure 5-15: Reverse Plug Simulation
Parameter
Code Display Function Range Initial Value
Access
Level
C01.03 Reverse Plug Determines whether
Reverse Plug Simulation is
enabled.
00–01 00 Basic/Adv
00 Disabled
01 Enabled
C01.04 Reverse Plug Decel
Time
Deceleration time during
Reverse Plug Simulation.
0.0–25.5 sec 2.0 Basic/Adv
C01.05 Reverse Plug Accel
Time
Acceleration time during
Reverse Plug Simulation
0.0–25.5 sec 2.0 Basic/Adv
To Next Page
Loading...
