IMPULSE•G+ Mini Advanced Instruction Manual - March 2014
2-4
IMPULSE•G+ Mini System Components And External Devices
Optional Drive Components
• 120 VAC Interface Card (Part Number G+M-IF-120VAC)
• 48 VAC Interface Card (Part Number G+M-IF-48VAC)
• 24 VAC Interface Card (Part Number G+M-IF-24VAC)
• P3S2OUT2 Card (Part Number P3S2-OUT2-KIT)
• Copy Stick (Part Number COPY-STICK)
• Basic Instruction Manual (Part Number G+ MINI BASIC MODE INST. MANUAL)
As-Required Drive Components
• AC reactor—line or load
•DC bus reactor
• External dynamic braking resistor(s)
• External dynamic braking unit
Required External Devices
•Motor
• User input device (pendant, joystick, PC, PLC, radio, or infrared control)
• External circuit protection devices (fuses or circuit breakers) (See “Suggested Circuit Protection
Specifications and Wire Size” in Chapter 3.)
• R-C surge suppressors on contactor coils
To Next Page
Loading...
