14
11/06
A
PASSWORD 250 i.e.
FRAME AND RUNNING GEAR
2
GETTING TO KNOW YOUR SCOOTER
T.W.I.
2 mm
TYRES
Type: Tubeless
NOTE It is possible to use tyres with load and speed
indexes that are higher than or identical to
those indicated. It is however necessary for
speed indexes to be identical for both tyres.
USE ONLY TYRES WITH THE RELEVANT
TYPE APPROVAL
Check the condition of your tyres (before each trip): if they are damaged (cracks) or cut, have them replaced as soon as
possible.
There are T.W.I. marks all around the tyre sidewalls. These correspond to tyre wear indicators situated in the tyre’s tread;
if there is no difference between the thickness of the tyre wear indicators and the tread depth, the tyre must be changed.
NOTE Minimum tread depth (front and rear) is 2 mm.
INFLATION PRESSURE
Tyre inflation pressure must be adjusted while the tyre is at ambient temperature.
NOTE Inflation pressure differing from the specified values can lead to higher fuel consumption, irregular
tyre wear, impaired vehicle performance and riding conditions.
To Next Page
Loading...
