80
A
FRAME AND RUNNING GEAR
DISASSEMBLY
11/06
PASSWORD 250 i.e.5
V
A
RADIATOR
• (Remove upper fairing).
• (Remove upper half fairings).
• (Remove sub-fairing).
• (Remove lower fairing).
DANGER OF BURNS!
Before proceeding, make sure that the cool-
ant temperature is lower than 50 °C.
• Remove radiator cap (A).
• Place a 5 l recipient under the scooter.
• Remove screw (V) and wait for ALL the coolant to flow
out.
When refitting screw (V) renew the copper
washer.
NOTE When reassembling, follow the procedure
outlined at the end of the heading.
• Empty the tank of coolant.
• Open clamp (B) and free the fan cable.
• Disconnect the fan connector (C).
At the time of reassembly remember to se-
cure the cable under the clamp.
B C
To Next Page
Loading...
