83
A
FRAME AND RUNNING GEAR
DISASSEMBLY
11/06
PASSWORD 250 i.e. 5
FAN UNIT
• Undo screws (V3).
NOTE For reassembly position the fan as shown in
the figure and position clamp (A) under the
screw as indicated.
V
A
V3
V3
A
RADIATOR
After having refitted the radiator and filled
the cooling system by pouring coolant into
filler point (A), bleed air from the system as
follows: loosen screw (V) and allow ALL THE
AIR to escape; now tighten screw (V).
To Next Page
Loading...
