A
PASSWORD 250 i.e.
FRAME AND RUNNING GEAR
DISASSEMBLY
5
52
11/06
AMBIENT TEMPERATURE SENSOR
• (Remove windshield).
• (Remove upper handlebar cover).
• Detach connector (A).
• Remove sensor (B) from lower handlebar cover (C).
The sensor must be mounted EXTERNAL-
LY to the lower handlebar cover as shown
in the figure.
A
C
RIGHT-HAND CONTROL
• (Remove windshield).
• (Remove upper handlebar cover).
• Disconnect throttle transmission (A).
• Undo screw (V) and remove counterweight.
• Undo screws (V2) and remove throttle control.
Use compressed air to reduce friction when
removing and refitting the twist grip.
V
V2
A
B
To Next Page
Loading...
