How to RIP a single track continued
RIP: ENTIRE CD is displayed.
between MP3 and PCM. Then push and release the
The CDR420 cannot convert MP3 fi les to PCM.
of the track to be ripped. This setting cannot be
changed. It is simply displayed as a reference.
played. If REC FORMAT selected in step 9 was
If Stereo turn the Jog Wheel to tab through 64,
80, 128, 160, 256, and 320. If Mono turn the Jog
Wheel to tab through 32, 40, 64, 80, 128, and 160.
Then press and release the Jog Wheel.
Press and release the Jog Wheel to begin renaming
the folder*, or turn the Jog Wheel to skip renam-
*Only the folder name (folder stored within the RIPPED CD folder
on the CDR420 HD) can be renamed at this time. The track will be
in the folder and named RIPPED/(folder name from this step)/
trackyy.xxx (yy = track number from step 8). You can use EDIT
MENU / EDIT TAGS / TRACK NAME to rename the track later.
The date and time (name) of the folder will be dis-
played with the fi rst character fl ashing**. Turn the
Jog Wheel to change the fl ashing character. Press
and release the Jog Wheel to accept the displayed
character and switch to the next character. Click
the Jog Wheel when the name is complete.
**A connected keyboard, see page 62, lets you type in the folder
Press and release the Jog Wheel.
14. Turn the Jog Wheel so Y is displayed, then press
and release the Jog Wheel.
as a percentage of the track and a graphic of the
To cancel ripping in progress, press and release the
. The CDR420 returns to Idle Mode.
When done ripping the CDR420 returns to Idle
To Next Page
Loading...
