Maytag MAT14CS - Component Access; Remove the Control Panel Assembly

4-1
Remove the two top T-20 security screws
on the control panel.
To avoid damage, lay a towel on the washer
top and place the control panel on the towel.
1.
2.
Remove the two top T-20 security screws
on the control panel.
1.
COMPONENT ACCESS
REMOVE THE CONTROL
PANEL ASSEMBLY
T-20
Screws
To avoid damage, lay a towel on the washer
top and place the control panel on the towel.
2.
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
T-20
Screws
REMOVE THE CONTROL
PANEL ASSEMBLY
- MN MODEL
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.