Maytag MAT14CS - Remove the Tub Support

4-33
REMOVE THE TUB SUPPORT
Remove the cabinet front (see page 4-16).
Remove the pump (see page 4-48).
Remove the motor (see page 4-50).
Remove the transmission (see page 4-52).
Remove the entire cabinet (see page 4-17).
Remove the agitator (see page 4-23).
Remove the tub ring (see page 4-24).
Remove the basket (see page 4-27).
1.
2.
3.
4.
5.
6.
7.
8.
Lift the tub off the tub support base to
remove it from the washer.
Remove the tub support, hold the tub to
allow the tub support to be pulled out of the
tub.
9.
10.
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.