127
box. Or select all taps by selecting the button. This will place a check
corresponding to all taps.
8. Select the individual taps for ratio testing by placing a check in the corresponding
box. Or select all taps by selecting the button. This will place a check
corresponding to all taps.
9. Select the individual taps for Winding Res testing by placing a check in the corresponding
box. Or select all taps by selecting the button. This will place a check
corresponding to all taps.
10. Select the individual taps for Short Circuit Impedance testing by placing a check in the
corresponding
box. Or select all taps by selecting the button. This will place a check
corresponding to all taps.
.
11. At this point, this test file could be saved, opened at a later date , and ran.
12. It can also be ran at this time by selecting the Blue Play button
13. A connection diagram will appear showing how to properly connect the MVCT to the VT
To Next Page
Loading...
