Memotec CX950 User Manual

7 ANALOG VOICE I/O CARD
3021M100-002
7-9
7.6 Analog Voice I/O Cables
The Analog Voice I/O Card connects to external devices through one of th
following separately-ordered cables:
• three meter (10 ft) straight-through cable with a male RJ-12 connector at each end
(part no. 60300049; used with FXS, FXO, and E&M type I or V voice interface).
• three meter (10 ft) straight-through cable with a male RJ-45 connector at each end
(part no. 60300050; used with E&M types I through V voice interfaces).
• one-meter (40 in) octopus cable with eight male RJ-12 connectors (each supporting six
signals) at one end for connection to voice ports, and forming a single cable at the
other end with a standard 25-pair telco female connector (part no. 60300051; used to
connect to PBX punch block with E&M type I or V voice interface).
• one-meter (40 in) octopus cable with six male RJ-45 connectors (each supporting eight
signals) at one end for connection to voice ports, and forming a single cable at the
other end with a standard 25-pair telco female connector (part no. 60300052; used to
connect to PBX punch block with E&M types I through V voice interfaces).

Memotec CX950 Specifications

General

Brand	Memotec
Model	CX950
Category	Network Hardware
Language	English