21 INSTALLATION AND CONFIGURATION
3021M100-002
21-11
21.6 External Equipment Cabling
Once you have installed the I/O cards you require, you can physically connect them
to their network devices after connecting the CX950 to its power source.
WARNING: Never
connect an I/O card to a network device without first connecting
the CX950 to its power source.
Never
disconnect the CX950 from its
power source without first disconnecting the cables of all its I/O cards
from their network devices.
Figure 21-4 ATM I/O Card Installation
To Next Page
Loading...
Need help?
General
