2 CHASSIS
3021M100-002
2-3
2.1.3 Environmental
Operating
Temperature
32° to 112° F (0° to 45° C)
Storage
Temperature
-40° to 176° F (-40° to 80° C)
Humidity
0 to 95% (non-condensing)
Cooling
Forced air
2.2 Front Panel
The CX950 front panel has one green POWER/STATUS LED. When lit, the LED
indicates system power is on at a suitable level to ensure proper function. When
flashing, the LED indicates a system failure.
2.3 Rear Panel
All communication cables and the power cord connect to the CX950 on the rear
panel.
We recommend that you power off the CX950 with the ON/OFF switch before
you attach or detach the power cable. You need not power off the CX950 to attach
or detach cables for the console port or I/O cards.
I/O Slots
The rear panel has eight standard I/O slots. The slots are labeled from SLOT 1 to
SLOT 8 starting at the panel’s far right, when viewed from the rear.
When a slot has no I/O card, it remains covered with a blank metal plate to limit
dust accumulation and electromagnetic radiation. When an I/O card has been
mounted in a slot, the connector plate on the I/O card replaces the panel’s blank
metal plate.
Console Port
The rear panel has a female RJ-11 connector labeled CONSOLE for the console
port. You can access the CX950 controlling software by attaching a terminal or a
PC running an asynchronous emulation software directly to this connector with
the RJ-11 (male) to DB-9 (female) cable shipped with the unit.
The asynchronous parameters for the console port are factory-set. The terminal or
PC parameters should be set to match:
Character Length: 8 bits/characte
To Next Page
Loading...
Need help?
General
