Memotec CX950

15 ETHERNET LAN I/O CARD
3021M100-002
15-3
15.2 Ethernet Port Signal Handling
The following table describes the signal to pin relationships for both the AUI and
10BaseT connectors.
Figure 15-2 Ethernet LAN I/O Card, Connector Plate
Table 15-1 Connector Pin-outs for Ethernet Ports
Signal AUI Pin No. Signal
10BaseT Pin
No.
Chassis Ground 1 RX+ 1
CIP 2 RX- 2
DOP 3 TX- 3
Chassis Ground 4 not connected 4
DIP 5 not connected 5
Signal Ground 6 TX+ 6
not connected 7 not connected 7
not connected 8 not connected 8
CIN 9
DON 10
Chassis Ground 11
DIN 12
+12 VDC 13
Chassis Ground 14
not connected 15