POWERHEAD
90-884294 OCTOBER 2001 Page 4A-45
Inspect crankshaft ball bearing as outlined in “Cleaning and Inspection,” following.
IMPORTANT: DO NOT remove crankshaft ball bearing, unless replacement is re-
quired.
22. Remove lower ball bearing from crankshaft as follows:
a. Remove retaining ring using a pair of snap ring pliers.
55983
b
a
a
c
a-Crankshaft Ball Bearing
b-Pliers
c-Retaining Ring
b. Press crankshaft out of lower ball bearing as shown.
a
b
d
c
51081
a
b
c
d
a-Press
b-Powerhead Stand (91-812549A1)
c-Crankshaft Ball Bearing
d-Universal Puller Plate (91-37241)
To Next Page
Loading...
