POWERHEAD
Page 4A-44 90-884294 OCTOBER 2001
19. Remove crankshaft and place in powerhead stand as shown.
IMPORTANT: DO NOT remove crankshaft sealing rings from crankshaft, unless re-
placement of a sealing ring(s) is necessary. Usually, crankshaft sealing rings do not
require replacement, unless broken.
CAUTION
Safety glasses should be worn when removing or installing crankshaft sealing
rings.
20. Remove retaining ring as shown.
58991
58992
a
b
a-Sealing Rings
b-Retaining Ring
21. Remove bearing race halves and roller bearings from crankshaft.
IMPORTANT: Keep same bearing races and roller bearings together.
58989
a
b
b
a-Bearing Race Halves
b-Roller Bearings
To Next Page
Loading...
