Mercury 225 EFI - Page 355

POWERHEAD
90-884294 OCTOBER 2001 Page 4A-43
15. Remove lower end cap from crankshaft.
16. Remove and discard O-ring seal from end cap.
17. Remove oil seals from end cap by driving seals out with a punch and hammer.
51849
b
a
a-O-ring
b-Seal
18. Inspect roller bearing in upper end cap as outlined in “Cleaning and Inspection”.
NOTE : If roller bearing is damaged, replace roller bearing carrier assembly.
51473
a
b
c
a-O-Ring
b-Seal
c-Carrier