CLAMP/SWIVEL BRACKETS & DRIVE SHAFT HOUSING
Page 5A-10 90-884294 OCTOBER 2001
4. While applying upward pressure on rear of adaptor plate, use a mallet and a piece of
hardwood against the adaptor plate to loosen gasket adhesion.
a
a-Adaptor Plate
5. Remove 2 bolts securing water tube to adaptor plate and remove tube. Remove 6
bolts securing exhaust tube to adaptor plate.
b
a
c
a-Bolts
b-Exhaust Tube
c-Water Tube
To Next Page
Loading...
