CLAMP/SWIVEL BRACKETS & DRIVE SHAFT HOUSING
90-884294 OCTOBER 2001 Page 5A-13
3. Position exhaust tube and gasket on adaptor plate. Secure both to plate with 6 bolts.
Torque bolts to 21 Ib. ft. (28.5 Nm).
4. Secure tube to adaptor plate with 2 bolts. Torque bolts to 80 lb. in. (9 Nm).
c
b
a
a-Exhaust Tube
b-Gasket
c-Water Tube
5. Position adaptor plate on top of housing.
6. Secure adaptor plate to drive shaft with 4 bolts. Torque bolts to 25 lb. ft. (34 Nm).
58003
a
a
a-Bolts [Torque to 25 lb. ft. (34 Nm)]
To Next Page
Loading...
