RIGHT HAND NON-RATCHETING
Page 6A-26 90-884294 OCTOBER 2001
13. Install the thrust washer and a new ball bearing onto the reverse gear. Press on the
inner race of the ball bearing using the pilot washer until the bearing bottoms out on
the gear.
23346
a
b
c
d
a-Pilot Washer
(91-36571)
b-Ball Bearing
c-Thrust Hub
d-Reverse Gear
14. Lubricate the bore that the bearing is pressed into with Premium Gear Lubricant.
15. Press the bearing carrier onto the reverse gear and bearing until the bearing bottoms
out in bearing carrier, using the pilot washer to press against the carrier.
23349
87
87
Premium Gear Lubricant
a
b
c
a-Pilot Washer (91-36571)
b-Bearing Carrier
c-Reverse Gear and Bearing Assembly
To Next Page
Loading...
