LEFT HAND NON-RATCHETING
Page 6B-74 90-884294 OCTOBER 2001
NOTE: Verify load washer is installed on propeller shaft prior to installing forward gear
assembly
4. Install tool with adaptor assembly over propeller shaft and into gear housing. Applying
downward pressure to bearing adaptor, remove installation tool from assembly.
55431
a
b
a-Forward Gear Bearing Adaptor
b-Load Washer
5. Install the bearing carrier over the propeller shaft pushing bearing carrier down until
it is fully seated.
a
b
55429
a-Propeller Shaft
b-Bearing Carrier
To Next Page
Loading...
