LEFT HAND NON-RATCHETING
90-884294 OCTOBER 2001 Page 6B-75
6. Align the bearing carrier “V” shaped notch with the alignment hole in the gear housing.
Install the tab washer with the external tab inserted into the hole in the gear housing.
50779
a
c
b
a-Gear Housing Tab Washer Alignment Hole (not seen)
b-“V” Shaped Notch in Bearing Carrier
c-Alignment Tab of Tab Washer
7. Insure that the “V” shaped tab aligns with the “V” notch in bearing carrier.
70714
b
a
a-Tab Washer
b-“V” Tab
To Next Page
Loading...
