Mercury 225 EFI - Page 657

LEFT HAND NON-RATCHETING
90-884294 OCTOBER 2001 Page 6B-93
12. Lubricate the large O-ring with 2-4-C Marine Lubricant with Teflon and assemble into
the gear housing as shown following.
50886
95
2-4-C Marine Lubricant with Teflon
95
a
a-O-ring
13. Prepare the bearing carrier for installation as follows:
a. Lubricate the outer diameter of the bearing carrier with 2-4-C Marine Lubricant
with Teflon.
b. Fill the space between the carrier oil seals with 2-4-C Marine Lubricant with Teflon.
c. Lubricate the needle bearing with Premium Gear Lubricant.
14. Install the bearing carrier assembly into the gear housing.
50826
87
Premium Gear Lubricant
95
2-4-C Marine Lubricant with Teflon
87
95
95
a
a-Bearing Carrier Assembly