LEFT HAND NON-RATCHETING
Page 6B-94 90-884294 OCTOBER 2001
15. Align the bearing carrier “V” shaped notch with the alignment hole in the gear housing
and then install the tab washer with the external tab inserted into the hole in the gear
housing.
70713
a
c
b
a-Gear Case Alignment Hole
b-“V” Shaped Notch in Bearing Carrier
c-Alignment Tab of Tab Washer
16. Insure that the “V” shaped tab aligns with the “V” notch in bearing carrier.
70714
b
a
a-Tab Washer
b-“V” Tab
To Next Page
Loading...
