LEFT HAND NON-RATCHETING
90-884294 OCTOBER 2001 Page 6B-99
9. Using tool provided in seal kit (26-816575A2) or water pump kit (817275A3), press
seal down over drive shaft (DO NOT GREASE DRIVE SHAFT) until tool seats against
pump housing.
57945
a
b
a-Tool
b-Seal
If tool is not available, lightly press seal against housing until a height of 0.350 in. ± 0.030
in. (8.9mm ± 0.76mm) is obtained.
57946
0.350 in. ± 0.030 in.
To Next Page
Loading...
