2. Technical Data
2.1 Functional Principle
The thermoIMAGER TIM calculates the surface temperature based on the emitted infrared energy of objects.
The two-dimensional detector (FPA - focal plain array) or (CMOS - Complementary metal-oxide-semiconduc-
tor) allows a measurement depending on the device max. pixels and will be shown as thermographic image
using standardized palettes. The radiometric processing of the picture data enables the user to do a comfor-
table detailed analysis with the software TIM Connect.
2.2 Functions
- Display of the real time thermal image (up to a max. of 1 kHz) with a wide range of measurement functions
- Recording function (video, radiometric video, snapshot)
- Analysis and post processing of infrared images/ videos
- Complete set up of parameters and remote control of the camera
To Next Page
Loading...