MINI Hawk High Performance Imager User’s Manual A-9
Appendices
Postal Symbologies <K460,postal symbology type,POSTNET status,PLANET status,
USPS4CB status,POSTNET allow B and B’ fields,Australia Post
allow 0 FCC>
Code 39
<
K470,
status,check character status,check character output status,
large intercharacter gap,fixed symbol length status,fixed symbol
length,full ASCII set>
Codabar <K471,status,start/stop match,start/stop output,large intercharacter
gap,fixed symbol length status,symbol length,check character
type,check character output>
Interleaved 2 of 5
<
K472,
status,check character status,check character output status
,
symbol length #1, symbol length #2, guard bar status,range mode
status>
UPC/EAN
<
K473,
UPC status,EAN status,supplemental status,separator status,
separator character,supplemental type,format UPC-E as UPC-A>
Code 128/EAN 128 <K474,status,fixed symbol length status,fixed symbol
length,EAN 128 status,output format,application record separator
status,application record separator character,application record
brackets,application record padding>
Code 93 <K475,status,fixed symbol length status,symbol length>
PDF417 <K476,status,[unused],fixed symbol length status,fixed symbol
length>
Pharmacode <K477,status,fixed bar count status,fixed bar count,minimum bar
count,bar width mode,direction,fixed threshold value>
Data Matrix <K479,ECC 200 status, ECC 000 status,ECC 050 status, ECC
080 status,ECC 100 status,ECC 140 status,ECC 120 status,ECC
130 status>
QR Code <K480,status>
BC412 <K481,status,check character output,fixed symbol length status,
fixed symbol length>
DataBar-14 (RSS-14) <K482,status>
DataBar Limited (RSS Limited) <K483,status>
DataBar Expanded (RSS Expanded) <K484,status,fixed symbol length status,fixed symbol length>
MicroPDF417
<
K485,
status,[unused],fixed symbol length status,fixed symbol
length>
I/O Parameters
Power On/Reset Counts <K406,power-on,resets,power-on saves,power-on flash saves>
Time Since Reset <K407,hours,minutes>
Service Message <K409,status,service message,threshold,resolution>
Serial Verification <K701,serial command echo status,serial command beep status,
control/hex output>
Beeper <K702,status>
Quality Output <K704,quality output separator,decodes per trigger status>
Symbol Data Output <K705,symbol data output status,when to output>
Read Duration Output <K706,status,separator>
No Read Message <K714,status,message>
Frame Information <K734,output frame number,output coordinates>
LED Configuration <K737,LED mode,ISO/IEC 16022 grade>
To Next Page
Loading...
