MIMAKI UJF-3042HG - Page 101

Washing the Nozzle
4-21
4
Maintenance
7
Dip washing liquid into the cleaning swab, and wipe
dirt of the wiper nozzle.
• Wipe the places shown in the right.
8
Put washing liquid into the dropper, and drop on the
caps to fill them.
• Fill the washing liquid into the four caps.
9
Replace the front cover, and press the key.
• Capping is performed.
10
Set leaving time by pressing the or key, and
press the key.
• Usually set 10 min.
(Set value: 1 to 99 min)
• After the leaving time, cleaning is performed.
11
Press the key to finish.
• Adjust the leaving time depending on frequency of use or dirt of the nozzle.
Front
Back
Fill the liquid.
COMP LET ED : e n t
ENTER
STAT I ON
LEAV ING : 1mi n
CLEAN I NG ACT I VE
***-----------------
ENTER
END